Township White

Township White Traditional Simple Corbel
SKU# SC10-STHSNW

Width 1-1/8" | Height 4" | Depth 5"

Traditional simple corbel.

On Sale
Special Price $102.07
(0% off)
Regular Price $102.07

Qty
Township White 15" Roll Out Tray
SKU# ROTD-15-STHSNW

Width 11-3/8" | Height 4" | Depth 21"

Roll out tray to be used with a 15" wide base cabinet. The roll out tray will come with the mounting hardware and glides. *Please note this roll out tray will only work with this collection and will have a natural finish*

On Sale
Special Price $173.20
(0% off)
Regular Price $173.20

Qty
Township White Tall Decorative Base End Panel
SKU# MPBEP-STHSNW

Width 12" | Height 49-1/2" | Depth 3/4"

Pantry decorative base end panel to be used on the side of a tall cabinet or panel that will also match the door style. This would be used in conjunction with a 30", 36" or 42" high wall decorative end panel (depending on the height of the tall cabinet/panel, 30" for an 84" tall cabinet/panel, 36" for a 90" tall cabinet/panel, or 42" for a 96" tall cabinet/panel ). **PLEASE NOTE each panel is 12" wide so a quantity of (2) will need to be ordered and used side by side, along with (2) of the corresponding wall decorative end panels for the top. A total of 4 panels will be used on the side of a tall cabinet**.

On Sale
Special Price $235.06
(0% off)
Regular Price $235.06

Qty
Township White 15" Wall Decorative End Panel
SKU# MWEP15-STHSNW

Width 12" | Height 15" | Depth 3/4"

Decorative end panel that will fit on the side of a 15" high cabinet and will also match the door style.

On Sale
Special Price $61.86
(0% off)
Regular Price $61.86

Qty

Shipping Time:	Ships in 5-15 Business Days
Style:	Slim Shaker
Face Frame:	3/4" solid wood
Door Frame:	7/8" solid wood
Door Center:	HDF (HDF is used to avoid cracking/warping)
Sides:	1/2" veneered plywood with UV finish
Top & Bottom (Wall):	1/2" veneered plywood with UV finish
Bottom (Base):	1/2" veneered plywood with UV finish
Back Panel:	1/2" veneered plywood with UV finish
Shelves:	3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base Cabinet Shelf Depth:	Full depth
Drawer Box:	3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel
Drawer Glides:	Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base Corner Supports:	Wood corner supports and 1/4" plywood I-beams
Overlay:	Full
Hinges:	Concealed 6-way adjustable soft closing hinges
Cabinet Interior:	Natural finish
Center Stile:	None
Assembly Method:	Nail/screw/glue
Finish:	Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning
Toe Kick:	1/2" plywood toe kick (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	No installation rail due to full 1/2" back
Wall Cabinet Bottoms Finished (Exterior):	Natural, bottom edges of side panels are unfinished
CARB Compliant:	Yes
Door Hinges:	Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe Kicks Included w/Base Cabinets:	No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Sides Panels Finished:	Yes
Installation/Designer Note:	Since the door is 7/8, if a cabinet has a door and is getting installed directly against a wall, deeper cabinet/appliance, or refrigerator panel, it will need to use a clearance strip. Clearance strips will be included with all kitchen orders at no charge, in addition to a diagram and instructions. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Township Rift Oak

Township Rift Black Oak

Get Help

Thank you!