Prairie Shaker

Prairie Shaker 12x42 Wall End Panel
SKU# WEP12X42-FTS

Width 11.75" | Height 42" | Depth 3/16"

Wall end panel. Please note the cabinet sides are plywood so will not have knots and will stain lighter due to the plywood material, for a closer matched stained side with knots, add this end panels to any exposed 12" deep wall cabinet sides (height can be cut to size, as needed).

On Sale
Special Price $34.14
(0% off)
Regular Price $34.14

Qty
Prairie Shaker 12" Base Cabinet
SKU# B12-FTS

Width 12" |Height 34.5" |Depth 24"

1 door base cabinet with 1 drawer and 1 adjustable shelf.

On Sale
Special Price $399.17
(0% off)
Regular Price $399.17

Qty
Prairie Shaker 15" Base Cabinet
SKU# B15-FTS

Width 15" |Height 34.5" |Depth 24"

1 door base cabinet with 1 drawer and 1 adjustable shelf.

On Sale
Special Price $405.75
(0% off)
Regular Price $405.75

Qty
Prairie Shaker 15" 3-Drawer Base Cabinet
SKU# DB15-FTS

Width 15" |Height 34.5" |Depth 24"

3 drawer base cabinet. Top drawer front is 6-1/8"H, bottom 2 drawer fronts are 11-1/8"H.

On Sale
Special Price $711.70
(0% off)
Regular Price $711.70

Qty

Shipping Time:	Ships in 3-10 business days
Style:	Shaker
Face Frame:	3/4" x 1-1/2" Solid wood
Door Frame:	3/4" x 2-1/4" Solid birch wood
Door Center:	1/4" HDF with wood veneer
Door Frame Width:	2.25"
Center Panel Beveled Edge:	Yes
Sides:	1/2" Plywood
Top & Bottom (Wall):	1/2" Plywood
Bottom (Base):	3/8"Plywood
Back Panel:	1/2" Plywood sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)
Shelves:	3/4" Plywood shelves, edge banded
Base Cabinet Shelf Depth:	10-1/2"
Drawer Box:	3/4" solid hardwood, 3/8" plywood bottom, dovetailed
Drawer Glides:	Full extension, undermount, soft-close glides
Drawer Fronts:	Solid birch, slab drawer fronts
Base Corner Supports:	High impact, injection molded plastic
Overlay:	Full
Hinges:	6-way adjustable, soft-close, concealed hinges, 110 degree opening
Cabinet Interior:	Natural
Center Stile:	None unless otherwisenoted
Assembly Method:	Cam lock
Finish:	Polyurethane, UV resistant top coat with an oil based stain
Toe Kick:	1/2" Plywood
Installation Rail:	3/4" x 1-1/4" hardwood
Wall Cabinet Bottoms Finished (Exterior):	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped.
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes (please note the cabinet sides are plywood so will not have knots and will stain lighter due to the plywood material, for a closer matched stained side with knots, add end panels to any exposed cabinet sides, EP24X35 for bases or WEP12X42 for walls)
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Farmhouse Walnut Shaker

Get Help

Thank you!