Hudson Ember - Quick Ship

Width 1-1/2" | Height 96" | Depth 30"

Refrigerator end panel with a 1-1/2" stile on the front. The panel will be finished on both sides. The front edge of the panel is not finished so the stile must be used. Filler can be trimmed to 3/4" if necessary.

Width 25.5" (42" wall space on each wall) | Height 34.5" | Depth .75"

Corner sink base front and floor. Finished toe kick is not included. Once installed, this will take up 42" of wall space from the corner out, on each wall. These items should be installed between two cabinets, they cannot be used with an appliance directly on either side. To ensure proper installation, additional countertop support will be needed along the back wall and corner area. Additionally, a base support should be built on-site to provide adequate stability. Please note that hardware is not provided to attach this item to adjacent cabinets due to the flexibility and versatility of the item and how it could be used.

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has two 23-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 14-1/2" wide functional drawer on either side on top. Cabinet will have a center stile.