Euro White Grain - Quick Ship

Width 12" |Height 34-1/2" |Depth 24"

Full height door base pullout with 2 shelves that will not be adjustable. There will be metal wire surrounding the shelves.Finished end panels are required for exposed sides. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after delivery, in order to be flush with the door front, to give an inset appearance.*

Width 120" |Height |Depth 3/4"

Edgebanding that will come in a 10' roll and will match the sized edges on the cabinet box, doors, panels and fillers. Edgebanding can be applied to the edge of a cabinet box so it matches the door finish instead of the grey linen finish of the cabinet box edging. It can be applied right on the outside of the cabinet box edges using glue. The edgebanding can also be used to cover the edge of any panels or fillers that have been trimmed. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after delivery, in order to be flush with the door front, to give an inset appearance.*

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 15" |Height 22-5/8" |Depth 3/4"

Wall overlay panel to be used on the exposed side of a 23" high wall cabinet that’s no more than15” deep. The panel will be edgebanded on all 4 edges. The panel can be cut to size if needed which will result in a raw edge. Edgebanding (sku: EB10) can be used to finish any raw edges. *Please note if a finished end panel is added as an option, these are oversized panels and designed to be trimmed down on site, after delivery, in order to be flush with the door front, to give an inset appearance.*