Milan White Matte

Width 36" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 36" | Height 30" | Depth 24"

Diagonal corner sink front that will take up 36" of wall space from the corner out, on each wall, once installed. The door width is 15-45/64" and it uses 45-degree hinges with Blumotion soft close. The false drawer front is 6-3/4" high. It will include the sink front floor as well as four black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. No shelves will be included.

Width 36" | Height 30" | Depth 24"

Full height door diagonal corner sink front that will take up 36" of wall space from the corner out, on each wall, once installed. The door width is 15-45/64" and it uses 45-degree hinges with Blumotion soft close. It will include the sink front floor as well as four black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. No shelves will be included.

Width 36" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8" and the height above the doors to the top of the cabinet is 11-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base).The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 34-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.