Portland Oak
Accident Protection Warranty For Your Entire Laundry Room! Learn More!
The Portland Oak collection offers a contemporary twist on classic Shaker design with its sleek, slim-profile doors. Crafted from high-quality American Oak and plywood, these cabinets showcase a refined wood grain and a warm, natural finish, bringing both elegance and durability to any space. Pair with the Portland White for a stunning contrast!
This finish is available in both Ready to Assemble and Pre-Assembled
| Shipping Time: | Shipped in 5-15 business days |
| Style: | Slim Shaker |
| Face Frame: | 3/4" American Oak |
| Door Frame: | 3/4" American Oak |
| Door Center: | 13/16" American Oak Veneer on MDF/HDF (to avoid cracking/warping) |
| Sides: | 1/2" A-Grade plywood |
| Top & Bottom (Wall): | 1/2" A-Grade plywood |
| Bottom (Base): | 3/8" A-Grade plywood |
| Back Panel: | 1/2" full back |
| Shelves: | 3/4 " A-Grade plywood |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Wood corner brackets with wood I-beam construction |
| Overlay: | Full with Butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Matches door finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | Steel Clip |
| Finish: | Waterborne UV finish by Sherwin-Williams |
| Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
| Installation Rail: | Full1/2"back |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
How to Install Molding
Assembly instructions for all cabinets- schematic drawings
Login and Registration Form