Stratton Khaki Shaker
Ships in 4-6 weeks
Accident Protection Warranty For Your Entire Bar Room! Learn More!
The Stratton Khaki Shaker cabinet collection is a bright finish which will make any space feel welcoming. These cabinets will add a modern touch to your home due to its clean lines and light coloring. These cabinets are full overlay doors and come with stainless steel, full extension, soft close drawer glides and dovetail drawers.
| Shipping Time: |
Ships in 4-6 weeks |
| Style: | Shaker |
| Door Frame: | 3/4" HDF |
| Door Center: | 3/8" HDF |
| Door Frame Width: | 2.5" |
| Center Panel Beveled Edge: | No |
| Sides: | 1/2" Plywood |
| Top & Bottom (Wall): | 1/2" Plywood |
| Bottom (Base): | 3/8"Plywood |
| Back Panel: | 1/2" Plywood *sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)* |
| Shelves: | 5/8" Plywood shelves, edge banded |
| Base Cabinet Shelf Depth: | 10-1/2" |
| Drawer Box: | 5/8" solid hardwood, 3/8" plywood bottom, dovetailed |
| Drawer Glides: | Full extension, undermount, soft-close glides |
| Â | Â |
| Base Corner Supports: | High impact, injection molded plastic |
| Overlay: | Full |
| Hinges: | 6-way adjustable, soft-close, concealed hinges, 110 degree opening |
| Cabinet Interior: | Natural |
| Center Stile: |
None unless otherwisenoted |
| Assembly Method: | Cam lock |
| Finish: | Polyurethane, UV resistant paint, with a water-based coating |
| Toe Kick: | 1/2" Plywood |
| Installation Rail: | 3/4" x 1-1/4" hardwood |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped. |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above. |
Â
Accessories
How to Install Molding
Drawer Glide
Blumotion Soft Close Hinge Adapters
Roll Out Tray
Base Cabinets
Single Door Base Cabinets: 09" - 21"
Double Door Base Cabinets: 24" - 30"
Double Door Base Cabinets: 33" - 48"
Blind Base Cabinet
Drawer Base Cabinet
Diagonal Corner Base Cabinet
Sink Base Cabinets: 24" - 30"
Sink Base Cabinets: 33" - 48"
Sink Base Cabinets: 60"
Wall Cabinets
Wall Cabinets: 09x30 - 21x30
Wall Cabinets: 09x42 - 21x42
Wall Cabinets: 24x12 - 36x12
Wall Cabinets: 24x30 - 48x30
Wall Cabinets: 24x42 - 48x42
Wall Cabinets: 30x15 - 30x18 (Plate Rack)
Wall Cabinets: 30x15 - 30x18 (Wine Rack)
Wall Blind Corner Cabinet: 24x30 - 36x30
Wall Blind Corner Cabinet: 24x42 - 36x42
Wall Diagonal Corner Cabinet: 24x30 - 27x30
Wall Diagonal Corner Cabinet: 24x42 - 27x42
Microwave Cabinet
Â
Pantry Cabinets
Wall Pantry Cabinets: 18x84 - 18x96
Wall Pantry Cabinets: 24x84 - 24x96
Oven Cabinets
Oven Cabinet: 33x24x84 - 33x24x96
Oven Cabinet: 30x84 - 33x96
Login and Registration Form