Asheville Cloud Shaker

Asheville Cloud Shaker 8' Bead Molding
SKU# BM8-HDCW

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

On Sale
Special Price $123.15
(0% off)
Regular Price $123.15

Qty
Asheville Cloud Shaker 8' Curved Crown Molding
SKU# CVM8-HDCW

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

On Sale
Special Price $179.57
(0% off)
Regular Price $179.57

Qty
Asheville Cloud Shaker 96x48x1/4 Finished Plywood Panel
SKU# FPP9648-1-4-HDCW

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

On Sale
Special Price $282.08
(0% off)
Regular Price $282.08

Qty
Asheville Cloud Shaker 96x48x3/4 Finished Plywood Panel
SKU# FPP9648-3-4-HDCW

Width 96" | Height 48" | Depth 3/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on both sides and all edges.

On Sale
Special Price $512.44
(0% off)
Regular Price $512.44

Qty

Shipping Time:	Ships in 5-15 Business Days
Style:	Shaker
Face Frame:	3/4" solid wood
Door Frame:	5-piece HDF door frame
Door Center:	3/4" HDF (HDF is used to avoid cracking/warping)
Door Frame Width:	2.5"
Sides:	1/2" veneered plywood with UV finish
Top & Bottom (Wall):	1/2" veneered plywood with UV finish
Bottom (Base):	1/2" veneered plywood with UV finish
Back Panel:	1/4" plywood with 3/4" picture frame back panel
Shelves:	3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base Cabinet Shelf Depth:	Full depth
Drawer Box:	3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel
Drawer Glides:	Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base Corner Supports:	Metal corner supports
Overlay:	Full
Hinges:	Concealed 6-way adjustable soft closing hinges
Cabinet Interior:	Natural finish
Center Stile:	None
Assembly Method:	Nail/screw/glue
Finish:	Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning
Toe Kick:	1/2" plywood toe kick (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	No installation rail due to full 1/2" back
Wall Cabinet Bottoms Finished (Exterior):	Natural, bottom edges of side panels are unfinished
CARB Compliant:	Yes
Door Hinges:	Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe Kicks Included w/Base Cabinets:	No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Sides Panels Finished:	Yes
Installation/Designer Note:	If installing directly against a wall or appliance, it is advised to leave a small gap/add trim (scribe) to ensure drawers opening don't rub against the wall The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Asheville Cloud Shaker

Get Help

Thank you!