Vail White Shaker

Vail White Shaker 3x30 Fluted Decorative Filler
SKU# A30WF-VW

Width 3" | Height 30" | Depth 3/4"

Fluted decorative wall filler with rosette. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

On Sale
Special Price $62.09
(0% off)
Regular Price $62.09

Qty
Vail White Shaker 3x30 Wall Filler
SKU# WF3-3-4-VW

Width 3" | Height 30" | Depth 3/4"

Wall filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

On Sale
Special Price $37.93
(0% off)
Regular Price $37.93

Qty
Vail White Shaker Decorative Half Leg
SKU# POLE75-W330-VW

Width 3" | Height 30" | Depth 2-1/4"

Decorative half leg. The top flat section is 2" and the bottom flat section is 3". It is trimmable if needed.

On Sale
Special Price $217.32
(0% off)
Regular Price $217.32

Qty
Vail White Shaker Wall Column
SKU# CLW330-VW

Width 3" | Height 30" | Depth 15"
Wall column box (will come as one piece).

On Sale
Special Price $189.71
(0% off)
Regular Price $189.71

Qty

Shipping Time:	Shipped in 5-15 business days
Style:	Shaker
Face Frame:	3/4" x 1-5/8" Solid Birch
Door Frame:	3/4" Solid Birch
Door Center:	MDF/HDF (to avoid cracking/warping, reversed raised door panel)
Door Frame Width:	2.375"
Center Panel Beveled Edge:	No
Sides:	1/2" A-Grade plywood with wood veneer
Top & Bottom (Wall):	1/2" A-Grade plywood with wood veneer
Bottom (Base):	3/8" A-Grade plywood with wood veneer
Back Panel:	1/2" Full back
Shelves:	3/4 " A-Grade plywood with wood veneer
Base Cabinet Shelf Depth:	1/2
Drawer Box:	Solid Wood 17mm (close to 3/4") sides, Drawer bottom 3/8" plywood, Drawer length 21". Dovetail construction, Natural finish.
Drawer Glides:	Undermount, full extension with soft closing feature
Base Corner Supports:	Metal corner brackets
Overlay:	Full with butt doors
Hinges:	Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior:	Natural Finish
Center Stile:	No center stile on cabinetry 24"W to 36"W
Assembly Method:	L-bracket
Finish:	Polyurethane finish
Toe Kick:	1/2" Plywood (sides of the toe kicks will be unfinished)
Installation Rail:	None (there is a full back)
Wall Cabinet Bottoms Finished (Exterior):	Yes
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This)
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Get Help

Thank you!