Township Rift Oak

Aspen White Shaker Trash Pull-Out for 18" or 21" Base Cabinet
SKU# TCR21-2-AW-Assembled

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

On Sale
Special Price $857.14
(0% off)
Regular Price $857.14

Qty
Township Rift Oak 96x48x1/4 Finished Plywood Panel
SKU# FPP9648-1-4-STHWRO

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

On Sale
Special Price $684.89
(0% off)
Regular Price $684.89

Qty
Township Rift Oak 96x48x3/4 Finished Plywood Panel
SKU# FPP9648-3-4-STHWRO

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

On Sale
Special Price $1,175.80
(0% off)
Regular Price $1,175.80

Qty

Shipping Time:	Ships in 5-15 Business Days
Style:	Slim Shaker
Face Frame:	3/4" solid wood
Door Frame:	7/8" solid Rift White Oak, wire-brushed for texture, warmth and clarity
Door Center:	3/4" HDF w/veneer (wire-brushed for texture, warmth and clarity)
Sides:	1/2" veneered plywood with UV finish
Top & Bottom (Wall):	1/2" veneered plywood with UV finish
Bottom (Base):	1/2" veneered plywood with UV finish
Back Panel:	1/2" veneered plywood with UV finish
Shelves:	3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base Cabinet Shelf Depth:	Full depth
Drawer Box:	3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel
Drawer Glides:	Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base Corner Supports:	Wood corner supports and 1/4" plywood I-beams
Overlay:	Full
Hinges:	Concealed 6-way adjustable soft closing hinges
Cabinet Interior:	Natural finish
Center Stile:	None
Assembly Method:	Nail/screw/glue
Finish:	Natural finish with toner and glaze, then wire brushed. Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning.
Toe Kick:	1/2" plywood toe kick (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	No installation rail due to full 1/2" back
Wall Cabinet Bottoms Finished (Exterior):	Natural, bottom edges of side panels are unfinished
CARB Compliant:	Yes
Door Hinges:	Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe Kicks Included w/Base Cabinets:	No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Sides Panels Finished:	No, finished side(s) must be specified from options menu for each sku (except 24" deep wall cabinets, glass wall cabinets, wall open cabinets, microwave wall cabinets, wine cabinets, hoods, pantries, oven and vanity cabinets, which all come with pre-finished sides).
Installation/Designer Note:	Since the door is 7/8, if a cabinet has a door and is getting installed directly against a wall, deeper cabinet/appliance, or refrigerator panel, it will need to use a clearance strip. Clearance strips will be included with all kitchen orders at no charge, in addition to a diagram and instructions. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Township Rift Oak

Township White

Township Rift Black Oak

Get Help

Thank you!