Bayville Blue

Bayville Blue Tall Decorative Base End Panel
SKU# MPBEP-SEB-Assembled

Width 12" | Height 49.5" | Depth .75"

Pantry decorative base end panel to be used on the side of a tall cabinet or panel that will also match the door style. This would be used in conjunction with a 30", 36" or 42" high wall decorative end panel (depending on the height of the tall cabinet/panel, 30" for an 84" tall cabinet/panel, 36" for a 90" tall cabinet/panel, or 42" for a 96" tall cabinet/panel ). **PLEASE NOTE each panel is 12" wide so a quantity of (2) will need to be ordered and used side by side, along with (2) of the corresponding wall decorative end panels for the top. A total of 4 panels will be used on the side of a tall cabinet**.

$280.72

Qty
Bayville Blue 96x48x1/4 Finished Plywood Panel
SKU# FPP9648-1-4-SEB-Assembled

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

$392.11

Qty
Bayville Blue 96x48x3/4 Finished Plywood Panel
SKU# FPP9648-3-4-SEB-Assembled

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

$602.63

Qty

Shipping Time:	Ships in 5-15 Business Days
Style:	Recessed
Face Frame:	3/4" solid wood
Door Frame:	3/4" solid wood with 3/8" center panel
Door Center:	HDF (HDF is used to avoid cracking/warping)
Sides:	1/2" veneered plywood with UV finish
Top & Bottom (Wall):	1/2" veneered plywood with UV finish
Bottom (Base):	1/2" veneered plywood with UV finish
Back Panel:	1/2" veneered plywood with UV finish
Shelves:	3/4" veneered plywood, adjustable with UV finish, stainless steel shelf clips
Base Cabinet Shelf Depth:	Full depth
Drawer Box:	3/4" solid wood, dovetailed drawer box with 5-piece solid wood drawer front frame and MDF center panel
Drawer Glides:	Undermount, full extension, soft close glides, rated up to 50lbs (including the roll outs)
Base Corner Supports:	Wood corner supports and 1/4" plywood I-beams
Overlay:	Full
Hinges:	Concealed 6-way adjustable soft closing hinges
Cabinet Interior:	Natural finish
Center Stile:	None
Assembly Method:	Nail/screw/glue
Finish:	Hand sprayed, oven baked with a catalyzed conversion varnish top coat to promote durability and allow for easy cleaning
Toe Kick:	1/2" plywood toe kick (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	No installation rail due to full 1/2" back
Wall Cabinet Bottoms Finished (Exterior):	Natural, bottom edges of side panels are unfinished
CARB Compliant:	Yes
Door Hinges:	Wall cabinet doors can be flipped for L or R hinge orientation, base cabinets have pilot holes on L and R
Toe Kicks Included w/Base Cabinets:	No, 8' toe kicks are required for base, oven, pantry and vanity cabinets
Sides Panels Finished:	Yes
Installation/Designer Note:	If installing directly against a wall or appliance, it is advised to leave a small gap/add trim (scribe) to ensure drawers opening don't rub against the wall The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Bayville White

Get Help

Thank you!