| Minimum Cabinet Order: | 100 pieces |
| Delivered: | Pre-Assembled |
| Style: | Mitered Flat Panel |
| Base Cabinets: | Base cabinet specifications |
| Construction: | 3/4 x 2-1/4 solid wood rails with mortise and tenon corner joints Available in standard overlay only |
| Cabinet Fronts: | 3/4" Solid Wood Front stiles are pocket drilled and assembled with 11/4 screws for rugged durability |
| Center Panel: | 1/4 veneer Rubber balls stabilize panel and allow for wood expansion and contraction |
| Side Panels: | Standard 3/8 particle board Optional upgrade to 3/8" plywood Vinyl covered on both sides Glued and stapled in a 3/8 dado in the cabinets front frame |
| Back Panels: | Standard 3/8 particle board Optional upgrade to 3/8" plywood Vinyl covered on inside only Glued and stapled in a 3/8 dado and stapled to the hang rail and cabinet bottom |
| Floor Panels: | Standard 3/8 particle board Optional upgrade to 3/8" plywood Vinyl covered on inside only |
| Hanging Rails: | 3/4 x 11/2 all wood Installed on sides and back |
| Toe Kicks: | 4-1/2 high x 4 deep |
| Shelves: | Fixed 1/2 MDF Optional upgrade to fixed 1/2" plywood Bullnose, foil-covered front edges |
| Drawers: | 1/2 MDF Optional upgrade to 1/2 finished solid wood NOTE: Cabinets 27 - 36 W use 1/2 finished solid wood Bullnose, foil-covered top edges Dovetail construction standard Drawers glide smoothly on self-adjusting ball bearing nylon guides |
| Drawer Front: | Standard drawer front Optional 5-piece drawer front |
| Doors: | Butt Doors: Standard on 24 - 36 width cabinets |
| Finish: | All cabinet front and door surfaces receive stain and a catalyzed clear or a catalyzed paint finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids. |
| Hinges: | Hidden, optional self-closing adjustable hinge |
| Wall Cabinets: | Wall cabinet specifications |
| Cabinet Fronts: | 3/4 solid wood Front stiles are pocket drilled and assembled with 1-1/4 screws for rugged durability |
| Construction: | 3/4 x 2-1/4 solid wood rails with mortise and tenon corner joints Available in standard overlay only |
| Center Panel: | 1/4 veneer Rubber balls stabilize panel and allow for wood expansion and contraction |
| Side Panels: | 3/8 particle board Optional upgrade to 3/8 plywood Vinyl covered on inside ONLY Glued and nailed in a 3/8 dado and stapled to cabinet top and bottom |
| Top and Floor Panels: | 3/8 particle board Optional upgrade to 3/8 plywood Vinyl covered on inside ONLY |
| Backer Rails: | Particle board Optional upgrade to plywood Installed at both the top and bottom of the cabinet |
| Shelves: | Adjustable 1/2 MDF Optional upgrade to adjustable 1/2 plywood | Bullnose, foil-covered front edges Shelves are held in place with self-locking clips on the sides and center stile (if applicable) |
| Doors: | Butt Doors: Standard on 24 - 36 width cabinets |
| Finish: | All cabinet front and door surfaces receive stain and a catalyzed clear or a catalyzed paint finish. Our finish provides a deep, rich wood tone that is resistant to household chemicals, water, food stains and mild acids. |
| Hinges: | Hidden, optional self-closing adjustable hinge |
Login and Registration Form