Southport Espresso Shaker

Southport Espresso Shaker 24x30 Base Decorative Door
SKU# BDD24-ESP

Width 23.75" | Height 29.25" | Depth .75"
Base decorative door for the side of 24" deep base cabinet. **The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims can be used on the opposite side so it's level.**

On Sale
Special Price $231.72
(0% off)
Regular Price $231.72

Qty

Shipping Time:	Ships in 5-15 business days
Style:	Shaker
Face Frame:	3/4" x 1-1/2" solid wood
Door Frame:	Solid maple
Door Center:	Solid maple (reversed raised panel)
Door Frame Width:	3"
Center Panel Beveled Edge:	Yes
Sides:	1/2" plywood
Top & Bottom (Wall):	1/2" plywood
Bottom (Base):	1/2" plywood
Back Panel:	3" wide x 3/4" thick picture frame back with 1/4" plywood center
Shelves:	3/4" plywood, adjustable, metal shelf rests
Base Cabinet Shelf Depth:	18"
Drawer Front:	5-piece
Drawer Box:	Dovetail drawer boxes, 1/2" thick solid wood side panels. 3/8" thick plywood bottom
Drawer Glides:	Full extension, soft closing, undermount glides
Base Corner Supports:	Metal bracket reinforced corners
Overlay:	Full
Hinges:	Soft-close
Cabinet Interior:	Clear coated natural maple interior
Center Stile:	None
Assembly Method:	Screw, glue & staple assembly
Finish:	Polyurethane UV Resistant Finish
Toe Kick:	1/2" thick, edge banded
Installation Rail:	3/4" thick x 1-1/2" wide
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite)
Side Panels Finished:	Yes
Installation/Design Note:	Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards Schematic imagesand renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above.

Southport Espresso Shaker

Get Help

Thank you!