Shale Grey Shaker

Shale Grey Shaker 8' Rope Molding
SKU# PS-ROPE8

Width 96" | Height 9/16" | Depth .25"
Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

On Sale
Special Price $72.22
(0% off)
Regular Price $72.22

Qty

Shipping Time:	Ships in 1-3 weeks
Style:	Shaker
Face Frame:	3/4"solid wood
Door Frame:	HDF
Door Center:	HDF
Door Frame Width:	3"
Center Panel Beveled Edge:	Yes
Sides:	1/2" plywood
Top & Bottom (Wall):	1/2" plywood
Bottom (Base):	1/2" plywood
Back Panel:	1/2" plywood center
Shelves:	3/4" plywood, adjustable, plastic shelf clips
Base Cabinet Shelf Depth:	12"
Drawer Front:	5-piece
Drawer Box:	Dovetail drawer boxes, 3/4" thick solid wood side panels. 1/2" thick plywood bottom
Drawer Glides:	Full extension, soft closing, undermount glides
Base Corner Supports:	Metal bracket reinforced corners
Overlay:	Full
Hinges:	Soft-close
Cabinet Interior:	Matches door finish, including shelves (drawer boxes are a natural finish.
Center Stile:	Cabinets 39" and wider will have center stiles, these cabinet do not have butt doors.
Assembly Method:	Screw & Glue
Finish:	Baked on UV Finish
Toe Kick:	1/2" thick please note that while individual toe kicks come with each base cabinet, the 8' pieces of toe kick (TK8) should also be ordered to cover the unfinished edges of the side panels
Installation Rail:	3/4" plywood
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, doors can be flipped for a left hinge orientation (hinge holes may need to be drilled onsite) please note that certain base cabinets can be selected as left or right hinge, these are replacing the universal base cabinets, during this transition period, if a left or right is selected and isn't available yet, a universal base would be sent which can be hinged, on site, after delivery
Side Panels Finished:	Yes
Installation/Design Note:	Scribe needs to be used for a wall cabinet against a wall or deeper cabinet/appliance. For base cabinets, a 1/2" space needs to be left (which can be filled with a filler that is cut to size). The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards Schematic imagesand renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above.

Shale Grey Shaker

Get Help

Thank you!