Royal White Shaker

Royal White Shaker 30" Wall Decorative Door
SKU# RSW-WDD1230

Width 11-1/2" | Height 29" | Depth 3/4"

Decorative door for the side of a 12" deep by 30" high wall cabinet.

On Sale
Special Price $91.02
(0% off)
Regular Price $91.02

Qty
Royal White Shaker Base Decorative Door
SKU# RSW-BDD24

Width 23-1/2" | Height 29" | Depth 3/4"

Decorative panel for the side of a 24" deep base cabinet.

On Sale
Special Price $170.29
(0% off)
Regular Price $170.29

Qty

Shipping Time:	Ships in 5-7 business days
Style:	Shaker
Face Frame:	1-1/2" Solid Birch
Door Frame:	Solid Birch
Door Center:	3/8" MDF
Door Frame Width:	3"
Center Panel Beveled Edge:	Yes (slight bevel)
Sides:	1/2" plywood
Top & Bottom (Wall):	1/2" plywood
Bottom (Base):	1/2" plywood
Back Panel:	1/4" - 3/8" plywood with a 1/2" frame around the panel for added installation stability and strength
Shelves:	3/4" plywood
Base Cabinet Shelf Depth:	1/2 (pantry cabinets will have 3/4 depth shelves)
Drawer Box:	Dovetailed, 5/8" drawer box with 5-piece drawer front
Drawer Glides:	Undermount, full extension, soft close drawer glides
Base Corner Supports:	Wood corner brackets
Overlay:	Full
Hinges:	Concealed, 6-way adjustable, soft close hinges
Cabinet Interior:	UV coated, natural interior
Center Stile:	None
Assembly Method:	Nail/screw/glue: Dovetail box assembly or a dado panel assembly. Tall cabinets will all have a dado assembly w/metal clips (brackets included). Recommend using glue and bradnails for both assembly methods.
Finish:	Sherwin Williams Paint
Toe Kick:	1/2" plywood
Installation Rail:	1/2" plywood (1-1/2" narrower than cabinet width)
Wall Cabinet Bottoms Finished (Exterior):	Yes (side panel bottom edges will be unfinished)
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, hinge pilot holes are also pre-drilled on the left side of the face frame. For base cabinets, the hinges from the right side of the face frame can be removed, then screwed into the pilot holes on the left, for a left hinged door. Wall cabinets can have the door flipped around for a left hinge install.
Toe Kicks Included w/Base Cabinets:	Yes, however 8' toe kick (TK96) is recommended to be purchased and applied across adjacent cabinets so toe kick seams are not seen.
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Royal White Shaker

Get Help

Thank you!